Using a winding frame (optional) simplifies the winding of the diving hose considerably.

The Winding Frame consists of four poles to wind the hose around in the figures of eight. The diving hose should be wound up pressurized in figures of eight with a diameter greater than 500 mm for each turn.

When the diving hose has been wound onto the winding frame and the pressure in the diving hose has been released, it should be secured with the supplied tension straps to hold it in place during handling and transport. The ends of the diving hose should always be protected from water and dirt. Therefore always connect the ends of the diving hose to the supplied vent handle and make sure not to sharply bend the diving hose.